Wednesday, June 21, 2017

One of A Kind - Simon Says Stamp Exclusive Release

One of a Kind Collection

Have you seen the new Simon Says Stamp Exclusive Collection, One Of A Kind? It's a collection of beautiful products for summer. I used the new Heart Sprinkle Trail die set to create this sweet card. You can find the entire collection by clicking on the photo above.

I cut a 4-1/4" x 5-1/2" stitched rectangle from a piece of Neenah Solar White 110 lb. card stock and die cut the Heart Sprinkle Trail die across the card panel. The sentiment is from the Simon Says Stamp Miss You die set cut from Simon Says Stamp Black card stock. I added a heart and heart button with a black burlap bow. I then attached the card onto a 4-1/2" x 5-3/4" piece of Bazzill red card stock and then adhered that onto a 4-3/4" x 6" piece of Simon Says Stamp Black card stock.
This was an easy and fun card to make and there are so many other combinations of sentiments that will go so well with this beautiful die set. The leftover pieces after cutting make beautiful shaker pieces for a shaker card which I plan on doing for my next card.

You can find the Heart Sprinkle Trail die set by clicking on the photo below. Enjoy!

Simon Says Stamp HEART SPRINKLE TRAIL Wafer Dies S431 One Of A Kind

Tuesday, June 20, 2017

Floral Pocket Card - Tammy Tutterow Designs

Hi Everyone! I hope you're having a good week. Today, I created a fun pocket card using some of Tammy's wonderful products. I have always loved making these kinds of cards but they were very labor intensive because I would have to measure, cut, score and figure out the sizes for the large pocket and small envelope to fit inside. Well, not anymore! Tammy has several different pocket and tiny envelope designs which make them so simple to create. For my project, I chose the Library Pocket. These steel rule dies can cut through many different types of material so the pocket can be cut out of not only paper but leather, wood and chipboard.  I've put together a small tutorial below, but really it's just a matter of cut, decorate and attach. Simple, right? I thought so too. Enjoy!

To get started on my pocket card, I cut the Tammy Tutterow Library Pocket die from Neenah Solar White 110 lb. card stock. In the top left corner I stamped on the Flower Swag #2 stamp with Memento Tuxedo Black ink using my Misti tool.

I colored the image using Copic markers BG01, BG02, BG05, Y13, Y17, Y19, V04, V12, YG61, YG93, YG97 and the Milled Lavender Distress marker.

After forming the pocket, I realized that the bottom was too deep for the Deco Envelope that I wanted to tuck inside so I had to cut off a small portion from the bottom so it would fit.

I cut off 1-1/8" from the bottom.

Having cut a little off the bottom, my pocket is now the perfect size where I can tuck in a small envelope and have it just peek over the top. 

I cut the Deco Edge Envelope from Neenah Solar White card stock and ink the edges with Tumbled Glass Distress Ink.

To complete the card, I color and fussy cut some flowers from the Choose Joy stamp and adhere them to the bottom corner of the pocket. I adhere the pocket to a 4-1/4" x 6" piece of My Favorite Things Plaid Patterns card stock and adhere that panel onto a 4-1/2" x 6-1/4" piece of Bazzill Jelly Bean card stock. My secret note is tucked inside the envelope that is sealed with a small piece of Velcro and decorated with a small orange button. I hope you got some ideas for a fun pocket card where the message is only between you and the recipient. Have fun!!

Monday, June 19, 2017

Simon Says Stamp Monday Challenge - Let's Take A Vacation

Hey, everyone. I'm so happy you stopped by! I hope you're ready for a new challenge on the Simon Says Stamp Monday Challenge because we have another fun one this week, Let's Take A Vacation. Doesn't that sound fun! I created a wall hanging for my craft room to remind of a place that has captured a piece of my heart. It's a small, almost unknown, little seaside beach town and going there is like turning back the hands of time. The sunsets are amazing, the people are amazing, and the surfing is amazing. I put together a tutorial for some of the elements I created for the wall hanging, as well as how I created the background scene. Enjoy! 

Also, make sure to check out our amazing guest designer for the month of June. Anne's felt journal last week was amazing and I can only image what awesome creation she put together for this week's challenge.

Each week the DT has beautiful and inspiring projects, be sure to check them out by clicking on the link below ↓ 

I begin by creating the background scene for my wall hanging by inking the top half of a 4-1/2" x 5-1/2" piece of Neenah Solar White card stock with Squeezed Lemonade Distress Ink.

Next, I blend Spiced Marmalade Distress Ink over the first layer of ink only along the edges.

To finish creating the sunset, I ink Fossilized Amber Distress Ink next and then finish off the edges with Ripe Persimmon Distress Ink. I then blend everything together using Squeezed Lemonade Distress Ink. I set that aside to dry.

For the ocean, I take another 4-1/2" x 5-1/2" piece of Neenah Solar White card stock and ink the edges on the top half of the piece with Tumbled Glass Distress Ink.

Next, I ink Mermaid Lagoon Distress Ink to the edges of the card stock.

To finish the ocean, I ink on some Salty Ocean Distress Ink and finish off the edges with Faded Jeans Distress Ink. I blend everything together by going over the piece with Tumbled Glass Distress Ink. I set that aside to dry.

For the beach, ink a piece of Neenah Solar White card stock with Gathered Twigs Distress Ink.

I go over the entire piece with Scattered Straw Distress Ink and set that aside to dry.

To begin assembling the beach scene, I tear the ocean and sand pieces with my finger tips. I tear two pieces for the ocean and tear the brown piece only at the top for the sand. I lay all the pieces down on top of the sunset piece to create the scene as shown above. I gently use my fingertips to curl the torn edges downward to create waves on the torn blue pieces.

I live in Arizona and am surrounded by palm trees. I wanted mine to have dimension and character so I came up with a way to make them look a little more realistic. To do this, cut out six of the palm trees from the Tim Holtz Village Surf Shack die set. 

Take one palm tree in your hand and tear off part of the trunk near the bottom of the base. For the second palm tree, tear off the trunk a little higher up the trunk and continue to do this with three more palm tree trunks. Reserve one palm tree intact.

Cut off the palm fronds from the trunk of one of the torn palm tree trunks as this will serve to add more leaves to your palm tree giving it more dimension. Ink the palm tree trunks with Vintage Photo Distress Ink paying special attention to the torn area. Ink the torn area a little extra so you can almost see a line at the top.

Ink the outer palm fronds with Peeled Paint Distress Ink using the Ranger Mini Ink Blending Tool.

Ink the inside of the palm fronds with Forest Moss Distress Ink.

Now it's time to assemble your palm tree. Adhere the trunks together beginning with the shortest trunk working your way up to the tallest trunk.

Here you can see I'm continuing to build up my palm tree trunk.

Here, is the finished palm tree trunk.

Adhere the sectioned palm tree trunk over the complete unaltered palm tree trunk.

To adhere the second set of palm fronds, I placed a drop of Ranger Multi Matte Medium in the center of the bottom set of palm fronds and adhered that to the main palm tree.

Here is my completed palm tree. Isn't it adorable!!

I added three little coconuts to the palm tree and cut off the base of the palm tree before adhering it to the beach scene.

To rust the Tim Holtz Hanger, I use Prima Rust Effect Pastes. First, I dab on some brown rust all over the hanger and clips. There is no need to allow the first layer to dry before moving onto the next layer and there is no need to clean the brush between layers.

For the second layer, I dab on red rust paste in random areas on the hanger and clips.

Next, I add the gold rust paste in random areas.

To finish the rust effect, I go back and dab on more brown rust paste in random areas and set it aside to completely dry.

I add a metal ship's wheel from my stash onto the center of the wall hanger and a rusted Tim Holtz star to the center of the wheel to decorate the wall hanger.

The wood background is very simple. I cut a 5-3/4" x 7-1/2" piece of chipboard and cover it with the dark wood card stock from the Simple Stories Sn@p paper pack. I distress the edges with the Prima Distressing Tool. (Photo of distressed edges not shown but you can see the distressed edges on the finished project.)

To create the "Cayucos" banner at the top, I used the Tim Holtz Alphanumeric Thinlits dies on an inked piece of Neenah Solar White 110 lb. card stock piece. I used the same colors of ink as I used to create the ocean for the background. I placed the letters at angles for interest.

To complete the wall hanging, I add a surfboard from the Tim Holtz Surf Shack die set and a small gathered and tied burlap piece with some seashells at the base of the palm tree. I cut a strip of Neenah Desert Storm card stock and write the latitude and longitude of Cayucos on the strip with a black marker and ink the edges with Gathered Twigs Distress Ink. I cut the abbreviation letters for California from the same alphanumeric die set and adhere them to the bottom left corner. A small piece of gathered burlap is placed behind the top right corner of the beach scene. I clip the rusted hanger onto the wooded chipboard piece and add a small ship's wheel and rusted Tim Holtz Star to the center and my wall hanging is done.

I hope you enjoyed seeing the process I used to create my wall hanging for the Let's Take A Vacation challenge and that you join us for this fun challenge by adding your project to Simon Says Stamp's Monday Challenge Blog for your chance to win a $50 gift voucher to their amazing store.

For more inspiration, tips and tricks for all types of papercraft creations, follow Simon Says Stamp on:  Image result for small facebook icon  Image result for small pinterest icon  Image result for small twitter icon  Image result for small youtube icon  

You can find all the following supplies I used to create this project at Simon Says Stamp:

Related Posts Plugin for WordPress, Blogger...